Product ID:MS-400G, BASE COMPONENT
MSDS Date:05/08/1991
FSC:8030
NIIN:00N049010
Kit Part:Y
MSDS Number: BVCMP

AMERICAN SAFETY TECHNOLOGIES INC

565 EAGLE ROCK AVE
ROSELAND, NJ 07068
US

Emergency Phone: 201-403-2600;800-424-9300(CHEMTREC)

Info Phone: 201-403-2600

Preparer: F. LOELOFF

Cage: AMSAT

AMERICAN SAFETY TECHNOLOGIES INC.

ROSELAND, NJ 07068 US

Telephone: 800-424-9300

Cage: AMSAT

EPOXY RESIN; (BISPHENOL-A DIGLYCIDYL ETHER).

CAS: 25068-38-6

RTECS: KC2100000

OSHA PEL N/K

ACGIH TLV: N/K

XYLENE

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 3-4%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

EPICHLOROHYDRIN POLYGLYCOL REACTION PRODUCT

CAS: 41638-13-5

OSHA PEL N/K

ACGIH TLV: N/K

2-PROPANOL, 1-ETHOXY-; (PROPYLENE GLYCOL MONOETHYL ETHER)

CAS: 1569-02-4

RTECS: UB5250000

OSHA PEL N/K

ACGIH TLV: N/K

PROPANE, 1-(P-TERT-BUTYLPHENOXY)-2,3-EPOXY-; (MAY CONTAIN

CAS: 3101-60-8

RTECS: TX4250000

OSHA PEL N/K

ACGIH TLV: N/K

BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: 24%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

ALUMINUM OXIDE (EPA LISTS ONLY FIBROUS FORMS) (SARA III)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 47%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:SEE INGREDIENT 1.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:IRRITANT. AGGREGATE MAY CAUSE
INJURY. SKIN:MAY CAUSE MODERATE IRRITATION & SENSITIZATION.
INHAL:VAPORS MAY CAUSE HEADACHES, NAUSEA, DIZZINESS & RESPIRATORY
IRRITATION. INGEST:NO SPECIFIC INFORMAT ION AVAILABLE. CONTAINS
MATERIALS THAT MAY BE SLIGHTLY TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION, SENSITIZATION & DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA & OTHER SKIN
CONDITIONS.

First Aid:EYES:FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
GET MEDICAL ATTENTION. SKIN:REMOVE CONTAMINATED CLOTHING. WASH
CONTACT AREA W/MILD SOAP & WATER FOR 15 MINUTES. INHAL:REMOVE TO
FRESH AIR. IF BREATHING HAS STOPPED ADMINISTER ARTIFICIAL
RESPIRATION & SEEK MEDICAL ATTENTION. INGEST:DO NOT INDUCE VOMITING
(CONTAINS SOLVENT). GET MEDICAL ATTENTION.

Flash Point Method:SCC
Flash Point:>101F,>38C
Lower Limits:1.62%
Upper Limits:11.8%
Extinguishing Media:CHEMICAL FOAM & DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . REMOVE ALL IGNITION SOURCES.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE (DUE TO
BUILD UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT. DECOMPOSITION &
COMBUSTION PRODUCTS MAY BE TOXIC.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE SPILL.
ABSORB W/INERT MATERIAL & COLLECT FOR DISPOSAL. FLUSH CONTAMINATED
AREA W/WATER; PREVENT WASHINGS FROM ENTERING WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID ALL PERSONAL CONTACT. DO NOT
EXCEED 110F/43C IN STORAGE AREA. GROUND & BOND METAL CONTAINERS FOR
LIQUID TRANSFER TO AVOID STATIC SPARKS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR W/ORGANIC VAPOR
CARTRIDGE IF REQUIRED.
Ventilation:EXPLO-PROOF MECH VENT & LOC EXHST ARE REC. MECH EXHST IS
NOT REC AS SOLE MEANS OF CONTROLLING EMPLOYEE EXPOSURE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL SPLASH-PROOF GOGGLES.
Other Protective Equipment:IN OPERATIONS WHERE CONT MAY OCCUR
COVERALLS, APRON & IMPERVIOUS FOOT COVERING ARE REC. SFTY SHOWER &
EYE WASH (SUPDAT)
Work Hygienic Practices:IMMEDIATELY REMOVE & THOROUGHLY LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
OTHER PROT EQUIP:FACILITY SHOULD BE AVAILABLE TO EMPLOYEES.

Boiling Pt:B.P. Text:>240F,>116C
Vapor Pres:8 @ 20C
Vapor Density:3.1
Spec Gravity:2.3
Evaporation Rate & Reference:0.7 (BUTYL ACETATE=1)
Solubility in Water:SLIGHT
Appearance and Odor:PIGMENTED VISCOUS LIQUID; MILD ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES.

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.